10-05-2021

Android 2.3 6 Update Zip

Update Galaxy S2 to Android 2.3.6 XXKL1 Firmware. Extract the zip file to folder. Samsung Update Galaxy S II 2.3.6 Update Galaxy S II Android 2.3.6 Update Galaxy S2 Update Galaxy S2 2.3. How to update android version 2.3.6 to 4.4 > Solved how to update android version 2.3.6 to 4.4. Tags: Android. Galaxy; Samsung. Last response: September 28, 2015 7:19 AM in Android Smartphones.

The Samsung Galaxy Y S5360 is one of Samsung’s very popular entry-level Android handsets. When it was first released into the market, it originally came with Android 2.3.5 Gingerbread. But, Samsung has already released an official update for the device, which will bring the phone’s firmware to Android 2.3.6 Gingerbread.

Full-Adder in Verilog Review. A full adder is a combinational logic that takes 3 bits, a, b. All we need to do is write Verilog code that will replicate the full-adder encapsulated in SingleStage 4 times. // vars integer i; // Instantiate the Unit Under Test (UUT) MultiStages uut (. Verilog code for serial adder subtractor units.

Also referred to as build DDLA1, the firmware update ties up some of the loose ends in the original firmware build that came with the Galaxy Y when it first came out. Tfs build notifications application. So, even though the new version is not as exciting as Android 4.0 Ice Cream Sandwich, it may be worth updating your Galaxy Y with it.

This firmware update build DDLA1 for the Samsung Galaxy Y S5360 should not be applied if you have a phone which is network-locked. Doing so might cause damage to your phone or could brick your phone. Updating your handset to this firmware build will also make you lose root access (if you’ve previously rooted your phone).

Code

For instructions on how to upgrade your Galaxy Y S5360 to Gingerbread build DDLA1, read the rest of this guide.

Requirements

Complete the requirements below first before you proceed to the installation instructions.

  • Keep at least 50% battery charge (full charge preferred).
  • Disable antivirus and other security tools on your computer and phone.
  • Make a back up of all your important files and data in your phone.
  • If you have Samsung KIES, close it completely (or uninstall it) and don’t back up data using this tool.
  • DDLA1 update package. Get it here and save it to your computer.
  • PIT file for the update. Get it here and save it to your computer.
  • Odin3 v1.85. Get this tool here and save it to your computer.
Android 2.3 6 Update Zip

Instructions

WARNING: We do not guarantee that these instructions will work for you. Do not hold us responsible if you damage or brick your phone after you perform the procedure in this guide.

Screen Reader: Download Screen Saver To Nokia: Advertisement. Screen Reader For Nokia in title. NVDA Portable 2011.3 RC Desktop Enhancements - Screen Savers. SuperNova Screen Reader is a software screen reader that works by reading the screen interactively and communicating through a speech synthesiser or a refreshable Braille display. Nokia screen reader software download, free. The screen reader is an easy-to-use and simple application designed to meet the accessibility needs of Nokia smartphone users. The application is a simplified version of the powerful Mobile Speak screen reader. Expenses 2.0 have become more user friendly and more secure then before: your expenses are now secured with password, you can add new categories, change font colour and font size of the on-screen reports. Expenses 2.0 update released. Dec 23, 2011  At launch the phones supported by Nokia Screen Reader will be the Nokia C5 5MP, Nokia 700 and Nokia 701. The Nokia Screen Reader has been launched for the C5-00 and C5 5MP, It will officially support the Nokia 700 and 701 by the end of 2011. Once it is launched, you’ll be able to download Nokia Screen Reader from the Nokia Store.

Here’ how to upgrade your device:

  1. Enable USB Debugging mode on your device by going to Settings > Applications > Development.
  2. Unpack the DDLA1 update package that you have downloaded earlier. It’s a RAR archive, so you will need RAR extraction software such as WinRAR to extract its contents.
  3. Turn off your phone and reboot it into download mode. Do this by pressing the Volume Down key and the Home (middle) button simultaneously and then press the Power button.
  4. Run Odin3 on your computer.
  5. Connect your phone to your PC. Odin3 will detect your phone automatically. Check the yellow ID:COM in Odin3. If you see this, it means that the drivers are successfully loaded.
  6. In Odin3, load the files listed below into their respective tabs (highlighted in bold below). These files are are included in the archives that you have downloaded earlier.
    • PIT — totoro_0623.pit
    • Boot Loader — DefaultCalDataWithBoot_S5360DDLA1_REVO5.tar.md5
    • PDA — PDA_S5360DDLA1_REVO5.tar.md5
    • Phone — MODEM__S5360DDLA1_REVO5.tar.md5
    • CSC — GT-S5360-MULTI-CSC-ODDLA1.tar.md5
  7. Under “Option” in Odin3, check only “Auto Reboot” and “F. Reset Time”. Leave the other options unchecked.
  8. If you are done, click the Start button for the process to begin. If the update was successful your phone will restart.
  9. Turn off your device and enter into recovery mode.
  10. While in recovery mode, select “Wipe Data/Factory Reset” and “Wipe Cache Partition”.
  11. Reboot your device.
  12. Go to Settings > About Phone > Firmware Version and check whether it displays “Android 2.3.6 DDLA1”.

Congratulations! You have successfully updated your Samsung Galaxy Y S5360 to Android 2.3.6 Gingerbread build DDLA1.

Comments
Please enable JavaScript to view the comments powered by Disqus.

Firmware leaks keep on coming in the world Samsung Galaxy devices, and the latest of them is Android 2.3.6 based firmware for Samsung Galaxy S2 ─ XXKL1.

It’s the fourth leak of Android 2.3.6 based firmware, and as always I’ve no idea what’s changed (guess nobody has). Anyway we’re going to update 😉

Android 6 Update Download

NOTE:
This guide is applicable only for Samsung’s Galaxy S2 (S II) international version (i9100). Check your phone’s version in Settings – About Phone. It has to be “GT-i9100” for the XXKL1 firmware to be compatible with your device. If it’s not GT-i9100, simply don’t try this ROM on your android handset, don’t even think about it if you care not to brick your device.[/info]

Warning!
The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to you or your device, we won’t be held liable. You only will be responsible — you’ve been warned. Okay!

While investigating the link between the disappearance and some unusual whale sightings, journalist Carol Dawson finds much more—an enigmatic artifact that may not be of earthly origin. Arthur c clarke incontro con rama pdf to jpg file. The artifact may be worth millions—and Dawson and her colleagues must outwit thieves and criminals to keep it safe.

Pre-Installation tips:

  1. Backup your Apps and important data — bookmarks, contacts, SMS, APNs (internet settings), etc. This Android backup guide would help you.
  2. If you have Samsung’s PC software Kies installed, un-install it first because it may interrupt the flashing process.
  3. Drivers! — it’s important you’ve the proper drivers installed. Download links below:
    • 32 bit (x86) Windows | 64-bit (x64) Windows

Installation video

The video given below shows the installation of an earlier firmware (XXKG1), but the steps to update to XXKL1 are all similar, so you can easily follow the video to get some visual guidance.

Video:

[youtube video_id=”DenoU04sEMo” width=”630″ height=”400″ /]

Step by Step Instructions:

  1. Download the Android 2.3.6 Firmware – XXKL1. Filename: I9100XXKL1_I9100OXAKL1.rar. Size: 299.5 MB → Download Link. (password: sampro.pl)
  2. Extract the downloaded file ‘I9100XXKL1_I9100OXAKL1.rar’ to get these 4 files:
    1. CODE_I9100XXKL1_CL783870_REV02_eng_mid_ship.tar.md5
    2. GT-I9100-CSC-MULTI-OXAKL1.tar.md5
    3. MODEM_I9100XXKL1_REV_02_CL1085162.tar.md5
    4. u1_02_20110310_emmc_EXT4.pit (we won’t be using it since it’s not essential for flashing the firmware. Read Step 13 below this to know more)
  3. Download Odin software. Filename: Odin3-v1.85.zip. Size: 198 KB → Download Link. Extract the zip file to folder to get 2 files – Odin3 v1.85.exe and Odin3.ini. Do not delete the .ini file (the second one) since it’s very much required, too. when asked in step 6 below, open Odin by double clicking on the Odin3 v1.85.exe file.
  4. Disconnect your phone if it’s connected to PC. Switch Off your phone. Wait for vibration to confirm complete switch off.
  5. Now, put the Galaxy S2 in Download Mode — press and hold these keys together: Volume_DOWN+Home+Power. this is required to install the XXKG1 using Odin PC Software.
  6. Open Odin (from step 3) — Odin3 v1.85.exe.
  7. Connect your phone to PC now. You should get the message “Added! !” under the Odin’s message box in the bottom left. If you don’t get this message, than probably there is a problem with drivers. Make sure you’ve drivers installed.
  8. Important! On Odin, Do NOT tick the ‘Re-Partition’ checkbox, but keep the ‘Auto Reboot’ & ‘F. Reset Time’ checkboxes ticked. Do not touch any other checkbox or tab or anything, except as required in step 9 below.
  9. Select these files in Odin at respective tabs (check out the screenshot given at the top for help):
    1. Click the PDA Tab, and select CODE_I9100XXKL1_CL783870_REV02_eng_mid_ship.tar.md5 (from step 2.1)
    2. Click the Phone Tab, and select MODEM_I9100XXKL1_REV_02_CL1085162.tar.md5 (from step 2.3)
    3. Click the CSC Tab, and select GT-I9100-CSC-MULTI-OXAKL1.tar.md5 (from step 2.2)
  10. Double check everything said in step 8 and 9 above. [And, do not use the file in step 2.4 anywhere in Odin]. Your Odin’s window should look real similar to the image at the very top — which is my Odin’s screen while I flashed the XXKL1 on my Galaxy S.
  11. Now, hit the START button to let the process begin. When process at Odin finishes your phone will automatically reboot — and you can unplug the cable then. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin. If it’s red and with FAIL written over it, the process flashing process wasn’t successful.
  12. When it restarts, your Galaxy S2 will be running on Android 2.3.6 with Samsung’s custom UI TouchWiz 4 atop it. Check out your S2’s android version here – Settings → About Phone.
  13. About the .pit file (one you found in step 2.4). The .pit file re-partitions the phone’s internal memory space. You don’t need it often, that’s why we don’t use it generally. But if you are unable to flash the XXKL1 ROM successfully, you can try the whole process again but using the .pit file too this time.
    Important: When you use .pit file (ever!) you need to tick the Re-Partition checkbox too (which wasn’t the case earlier – check step 8 when we kept it un-ticked). So, if you are flashing the XXKL1 again, select the .pit file too (from step 2.4 ) in the PIT Tab together with all other files as said in step 9. Then, make sure the Re-Partition button is ticked too along with the Auto Reboot and F. Reset Time checkboxes — that is, all three checkboxes will be ticked if you use the .pit file.
  14. (Optional, of course) If you found this guide useful, share it with others too on webpages, forums, your Facebook/twitter/Google+ pages, etc. That would be helping us grow too!

Android Version 2.3.6 Update

If before flashing this, you had your phone rooted you would want the root back, right? Well, that’s very obvious. But chainfire hasn’t released a working root for XXKL1 yet. So I’d suggest you to root using SuperOneClick, it may work.

Android 2.3 6 Zip Download

Do let us know about your experience of the XXKL1 ROM in the comments below.